主要特點：
1、特高效率-工件厚度在60-200悶悶的正常加工效率在120-140平方毫米/分鐘**加工效率可達180平方毫米/分鐘；
2、高電流--5.5A大電流長時間加工工件，**大加工電流可達8A；
3、超低鉬絲耗損-5.5A大電流加工時的鉬絲耗損為8萬-10萬平方毫米絲損1絲；鉬絲連續加工時間可達48小時以上；
4、超集成--整個控制柜按集成化設計，便于維修和有效的降低故障率；
5、超厚度--**大加工工件厚度在1米以上；
6、超智能--高頻內部帶有采樣跟蹤指示，客戶可根據指示調整跟蹤速度；
7、低故障率--控制柜內部采用隔離式設計，操作面板采樣按鍵式設計有效的降低故障率。

Main features:
1,specialefficient - theworkpiece thicknessin normalprocessing efficiency60-200stuffyin the 120-140 squaremm/min;up to a maximum of180 mm/minutemachining efficiency;
2,high current--5.5Ahighcurrent for a long timethe workpiece,maximum working currentis up to 8A;Molybdenum wire,molybdenum wirewear
3,ultra lowloss-5.5A high currentprocessingat 80000-10 million squaremmwire wear1 silk;molybdenum wirecontinuous processingtime is 48 hours;
4,superintegration --thecontrol cabinetis designed according tothe integrated,easy torepairandreduce thefailure rate;
5,ultrathickness-maximum workpiecethickness in 1meters of above;
6,super intelligent--withhigh-frequencyinternalsampling trackingindicator,customers canaccording to the instructionsto adjust thetracking speed;
7,low failure rate,control cabinetwithisolation typedesign,operation panelsamplingpush-buttondesigneffectivelyreduces the failure rate.